Pb-Pb age of sedimentary phosphorite reworking in Lower Riphean carbonate sediments,the Satka Formation of Southern Urals

The mineral composition and U-Pb and Rb-Sr systematics of phosphorites from the Satka Formation of Lower Riphean carbonates, the Burzyan Group of Southern Urals, are studied. Phosphorites occurring as small lenses between stromatolite layers are composed largely of fluorapatite with admixture of detrital quartz, feldspars, illite, and chlorite. Phosphorite samples have been subjected to stepwise dissolution in 1 N (fraction L-1) and 2 N (fraction L-2) HCl. As is established, the maximum apatite content is characteristic of fraction L-1, while fraction L-2 is enriched in products of dolomite and sulfide dissolution and in elements leached from siliciclastic components. The Sr content in the Satka apatites (280–560 ppm) is substantially lower as compared with that in unaltered marine apatite. The ⁸⁷Sr/⁸⁶Sr “initial ratio in the phosphorites studied (0.71705–0.72484) and host dolomites from the lower part of the Satka Formation is significantly higher than in the Early Riphean seawater that indicates a reset of the Rb-Sr original systems in sediments. The Pb-Pb age of 1340 ± 30 Ma (MSWD = 6.4) estimated based on 7 data points characterizing fractions L-1 and L-2 is younger than the formation time of overlying Burzyan sediments, being consistent, within the error range, with date of the Mashak rifting event recorded at the Early-Middle Riphean boundary. The comparative U-Pb characteristics of two soluble fractions (L-1 and L-2) and silicate residue of phosphorites show that epigenetic redistribution of Pb and U was characteristic of the phosphorite horizon only. The initial Pb isotope composition and μ (²³⁸U/²⁰⁴Pb) estimated according to model by Stacey and Kramers for the early diagenetic fluids in carbonate and phosphate sediments of the Satka Formation suggest that they were in isotopic equilibrium with erosion products of the Taratash crystalline complex.     

The Ruiga intrusion: A typical example of a shallow-facies paleoproterozoic peridotite-gabbro-komatiite-basaltic association of the Vetreny Belt,Southeastern Fennoscandia

The Ruiga differentiated mafic-ultramafic intrusion in the northwestern part of the Vetreny Belt paleorift was described for the first time based on geological, petrological, geochronological, and geochemical data. The massif (20 km² in exposed area) is a typical example of shallow-facies peridotite-gabbro-komatiite-basalt associations and consists of three zones up to 810 m in total thickness (from bottom to top): melanogab-bronorite, peridotite, and gabbro. In spite of pervasive greenschist metamorphism, the rocks contain locally preserved primary minerals: olivine (Fo _75–86), bronzite, augite of variable composition, labradorite, and Cr-spinels. A mineral Sm-Nd isochron on olivine melanogabbronorite from the Ruiga Massif defines an age of 2.39 ± 0.05 Ga, while komatiitic basalts of the Vetreny Belt Formation were dated at 2.40–2.41 Ga (Puchtel et al., 1997). The rocks of the Ruiga intrusion and lava flows of Mt. Golets have similar major, rare-earth, and trace element composition, which suggests their derivation from a single deep-seated source. Their parent magma was presumably a high-Mg komatiitic basalt. In transitional crustal chambers, its composition was modified by olivine-controlled fractionation and crustal contamination, with the most contaminated first portions of the ejected melt. In terms of geology and geochemistry, the considered magmatic rocks of the Vetreny Belt are comparable with the Raglan Ni-PGE komatiite gabbro-peridotite complex in Canada (Naldrett, 2003).     

Neoproterozoic Volhynia-Brest magmatic province in the western East European craton: Within-plate magmatism in an ancient suture zone

The reasons for the isotopic and geochemical heterogeneity of magmatism of the Neoproterozoic large Volhynia-Brest igneous province (VBP) are considered. The province was formed at 550 Ma in response to the break up of the Rodinia supercontinent and extends along the western margin of the East European craton, being discordant to the Paleoproterozoic mobile zone that separates Sarmatia and Fennoscandia and the Mesoproterozoic Volhynia-Orsha aulacogen. The basalts of VBP show prominent spatiotemporal geochemical zoning. Based on petrographic, mineralogical, geochemical, and isotopic data, the following types of basalts can be distinguished: olivine-normative subalkaline basalts consisting of low-Ti (sLT, < 1.10–2.0 wt % TiO₂; ε_Nd(550) from ?6.6 to ?2.7) and medium-Ti (sMT, 2.0–3.0 wt % TiO₂, occasionally up to 3.6 wt % TiO₂; ε_Nd(550) from ?3.55 to + 0.6) varieties; normal quartz-normative basalts (tholeiites) including low-Ti (tLT, < 1.75–2.0 wt % TiO₂) and medium-to-high-Ti (tHT1, 2.0–3.6 wt % TiO₂, ε_Nd(550) from ?1.3 to + 1.0) varieties. The hypabyssal bodies are made up of subalkaline low-Ti olivine dolerites (LT, 1.2–1.5 wt % TiO₂; ε_Nd(550) = ?5.8) and subalkaline high-Ti olivine gabbrodolerites (HT2, 3.0–4.5 wt % TiO₂; ε_Nd(550) = ?2.5). Felsic rocks of VBP are classed as volcanic rocks of normal (andesidacites, dacites, and rhyodacites) and subalkaline (trachyrhyodacites) series with TiO₂ 0.72–0.77 wt% and ε_Nd(550) of ?12. The central part of VBP is underlain by a Paleoproterozoic domain formed by continent-arc accretion and contains widespread sills of HT2 dolerites and lavas of LT basalts; the northern part of the province is underlain by the juvenile Paleoproterozoic crust dominated by MT and HT1 basalts. MT and LT basalts underwent significant AFC-style upper crustal contamination. During their long residence in the upper crustal magmatic chambers, the basaltic melts fractionated and caused notable heating of the wall rocks and, correspondingly, nonmodal melting of the upper crustal protolith containing high-Rb phase (biotite), thus producing the most felsic rocks of the province. The basalts of VBP were derived from geochemically different sources: probably, the lithosphere and a deep-seated plume (PREMA type). The HT2 dolerites were generated mainly from a lithospheric source: by 3–4% melting of the geochemically enriched garnet lherzolite mantle. LT dolerites were obtained by partial melting of the modally metasomatized mantle containing volatile-bearing phases. The concepts of VBP formation were summarized in the model of three-stage plume-lithosphere interaction.     

An operational multiscale system for hazards prediction, mapping, and response

By definition, a crisis is a situation that requires assistance to be managed. Hence, response to a crisis involves the merging of local and non-local emergency response personnel. In this situation, it is critical that each participant: (1) know the roles and responsibilities of each of the other participants; (2) know the capabilities of each of the participants; and (3) have a common basis for action. For many types of natural disasters, this entails having a common operational picture of the unfolding events, including detailed information on the weather, both current and forecasted, that may impact on either the emergency itself or on response activities. The Consequences Assessment Tool Set (CATS) is a comprehensive package of hazard prediction models and casualty and damage assessment tools that provides a linkage between a modeled or observed effect and the attendant consequences for populations, infrastructure, and resources, and, hence, provides the common operational picture for emergency response. The Operational Multiscale Environment model with Grid Adaptivity (OMEGA) is an atmospheric simulation system that links the latest methods in computational fluid dynamics and high-resolution gridding technologies with numerical weather prediction to provide specific weather analysis and forecast capability that can be merged into the geographic information system framework of CATS. This paper documents the problem of emergency response as an end-to-end system and presents the integrated CATS–OMEGA system as a prototype of such a system that has been used successfully in a number of different situations.     

Urban consolidation and house prices: a case study of Melbourne 1990–2004

This paper explores the links between a strategic policy, urban consolidation, and house prices by examining the changes in the mix of housing and in house price for the period 1991–2004. We contend that urban consolidation could be seen as a source of additional supply, (which might be expected to be felt in lower prices and so contribute to a local policy objective) but also as a stimulus to demand (by developers who could bid up the price of lots where it was understood more housing could be built). Analyses were carried out at the metropolitan and sub-regional scales using correlation tests. The research finds very weak statistical connections, and concludes that this policy has not been associated with price changes.     

Photochemical models of the atmosphere and their application in ozonosphere and climate studies: A review

This review is devoted to problems in the photochemical modeling of atmospheric processes. The physicochemical and mathematical foundations underlying the construction of photochemical models are described, a classification of the atmospheric reactions is presented, and the features of photochemical modeling are considered under various irradiance conditions for various atmospheric layers and geographical regions. Atmospheric processes that are important to photochemical models are discussed. Applications involving photochemical models are outlined. Some results are presented to illustrate the capabilities of photochemical models. Special attention is given to relatively recent directions in photochemical modeling, such as data assimilation and inverse problems. The review can be used by experts in areas related to atmospheric chemistry as a basic source of knowledge on the subject and for the development of photochemical modules for atmospheric models.     

Calibration of JASON-1 Altimeter over Lake Erie

This article describes absolute calibration results for both JASON-1 and TOPEX Side B (TSB) altimeters obtained at the Lake Erie calibration site, Marblehead, Ohio, USA. Using 15 overflights, the estimated JASON altimeter bias at Marblehead is 58 ± 38 mm, with an uncertainty of 19 mm based on detailed error analysis. Assuming that the TSB bias is negligible, relative bias estimates using both data from the TSB-JASON formation flight period and data from 48 water level gauges around the entire Great Lakes confirmed the Marblehead results. Global analyses using both the formation flight data and dual-satellite (TSB and JASON) crossovers yield a similar relative bias estimate of 146 ± 59 mm, which agrees well with open ocean absolute calibration results obtained at Harvest, Corsica, and Bass Strait (e.g., Watson et al. 2003). We find that there is a strong dependence of bias estimates on the choice of sea state bias (SSB) models. Results indicate that the invariant JASON instrument bias estimated oceanwide is 71 mm, with additional biases of 76 mm or 28 mm contributed by the choice of Collecte Localisation Satellites (CLS) SSB or Center for Space Research (CSR) SSB model, respectively. Similar analysis in the Great Lakes yields the invariant JASON instrument bias at 19 mm, with the SSB contributed biases at 58 mm or 13 mm, respectively. The reason for the discrepancy is currently unknown and warrants further investigation. Finally, comparison of the TOPEX/POSEIDON mission (1992-2002) data with the Great Lakes water level gauge measurements yields a negligible TOPEX altimeter drift of 0.1 mm/yr.     

西沙群岛附近海域羽纹硅藻分类研究 Ⅰ

继“西沙、中沙群岛附近海域浮游硅藻类分类的研究”之后,作者又对西沙群岛所属岛、礁附近海域的羽纹硅藻进行了初步整理,共鉴定出羽纹硅藻11属27种及其变种(其中8种是我国首次记录)。本文对首次记录的种类进行了比较详细的说明和绘图。某些在我国其他海域已有报道的种类,如光辉针杆藻、串珠梯楔形藻、海生斑条藻、琴状舟形藻、流苏胸隔藻、双标胸隔藻、钝端双眉藻、细纹斜盘藻等,以往的描述较简单,并且与西沙群岛标本的形态也不完全雷同,为了便于应用和比较,本文根据西沙群岛的标本,又进行了较详细的描述或补充说明。对有图而无说明,或仅有名录的种类的国内资料,在地理分布内注明。为了保持西沙群岛所属海城硅藻分类研究的连续性,本文仍采用 Hendey 提出的分类系统排列。 为便于读者査找,每一种名下列出其同物异名。 标本多用小型浮游生物网采得,有些则取自珊瑚表面。插图均用描图仪描绘。     

Evidence of NW extension of the North Anatolian Fault Zone in the Marmara Sea: a new interpretation of the Marmara Sea (Izmit) earthquake on 17 August 1999

Active faults aligning in NW–SE direction and forming flower structures of strike-slip faults were observed in shallow seismic data from the shelf offshore of Avcılar in the northern Marmara Sea. By following the parallel drainage pattern and scarps, these faults were traced as NW–SE-directed lineaments in the morphology of the northern onshore sector of the Marmara Sea (eastern Thrace Peninsula). Right-lateral displacements in two watersheds of drainage and on the coast of the Marmara Sea and Black Sea are associated with these lineaments. This right-lateral displacement along the course of these faults suggests a new, active strike-slip fault zone located at the NW extension of the northern boundary fault of the ?ınarcık Basin in the Marmara Sea. This new fault zone is interpreted as the NW extension of the northern branch of the North Anatolian Fault Zone (NAFZ), extending from the ?ınarcık Basin of the Marmara Sea to the Black Sea coast of the Thrace Peninsula, and passing through B üy ük ?ekmece and K ü ? ük ?ekmece lagoons. These data suggest that the rupture of the 17 August 1999 earthquake in the NAFZ may have extended through Avcılar. Indeed, Avcılar and İzmit, both located on the Marmara Sea coast along the rupture route, were strongly struck by the earthquake whereas the settlements between Avcılar and İzmit were much less affected. Therefore, this interpretation can explain the extraordinary damage in Avcılar, based on the newly discovered rupture of the NAFZ in the Marmara Sea. However, this suggestion needs to be confirmed by further seismological studies.     

Geometrical aspects of a sonar-based navigation system for underwater vehicles

A novel self-contained navigation system has been devised for underwater vehicles operating in and around offshore installations. This system matches data from a sector-scanning sonar device to a computer model of the installation. The paper begins by highlighting the existing approaches to subsea navigation before outlining the main features of the proposed system. It then concentrates on a key component of this system which is a method for calculating the position and heading of an underwater vehicle navigating in the vincinity of tubular steel structures. An iterative solution method is presented which incorporates six degree of freedom vehicle motions and this is verified in a series of laboratory experiments with various arrangements of structural members and using a commercial sonar device. The key features, applications and performance of this method are discussed. The main conclusion is that the proposed method for calculating the position and heading of an underwater vehicle contributes towards achieving an accurate and reliable subsea navigation capability.